Fuel hose for outside the fuel tank
This fabric-reinforced fuel hose is made of the material NBR / CR (butadiene acrylonitrile rubber / chloroprene rubber) in accordance with DIN 73379 1 Type 2A. It is UV and ozone resistant and also for E10 and biodiesel suitable. For this he is abrasive resistant than plastic tubing and are distinguished in particular by a high temperature and heat resistance. Also suitable for cars.
The technical data at a glance:
- Inner diameter 5, 6 , 8 or 9,3 mm
- Highly flexible even after years
- UV and ozone-resistant
- Resistant to gasoline, E10, diesel, bio-diesel, fuel oil, water and air
- Temperature resistant in the range of -40 to 90 ° C (short term up to 110 ° C)
- Operating Pressure: 10 bar
- Bursting pressure: 30 bar
- Color: Black
- Material: NBR / CR (butadiene acrylonitrile rubber / chloroprene rubber)
- Not suitable for assembly in the fuel tank.
Special hose for use in fuel (New)
These fabric-reinforced-tank fuel hose is a special variant that is specifically designed only for use in fuel. It is required for fuel pumps in fuel tanks and are correspondingly internally and externally against fuel resistant. This special hoses are resistant especially against E10 and bio-diesel. Made from the material NBR / NBR (butadiene acrylonitrile rubber) according to DIN 73379 are abrasive resistant as plastic tubing and are particularly distinguished by their temperature and heat resistance. They are extremely flexible and designed so that can not happen, a bending of the hose by an unfavorable installation. Also suitable for passenger cars.
The technical data at a glance:
- Inner diameter 8 mm
- Highly flexible even after years
- Resistant to gasoline, E10, diesel, bio-diesel, fuel oil, water and air
- Temperature resistant in the range of -40 to 90 ° C
- Operating Pressure: 8 bar
- Bursting pressure: 30 bar
- Color: Black
- Material: NBR / NBR (butadiene acrylonitrile rubber)
- Only suitable for assembly in the fuel tank!