Am Stahlwerk 11, 45527 Hattingen +49 2324 90 22 90 info@stahlbus.de

Select your language

    Operation of the stahlbus Bleeder Valve

    Bleeding brakes with the stahlbus® Bleeder Valve!

    Bleeeding brakes

    An Internet research has shown: Bleeding brakes is difficult, and sometimes it is even impossible.

    We have found the reason for this problem. Our solution to it is the newly developed stahlbus® Bleeder Valve!

    It solves the problem where it arises: For optimal bleeding brakes or clutches it must be completely sealed during the bleeding procedure!

    No brake fluid may leak out and attack the surfaces of the calliper or painted parts. But, even much more important, no air may enter into the brake system / clutch through the thread of the bleeder valve.

    Owing to the enlarged transfer ports, which are bigger than the conventional cross-holes, deposits or contaminations cannot harm this valve. Also contributing thereto are the special material and the coating.

    Adding thereto is the simple one-hand operation through the integrated non-return valve. This makes the otherwise error-prone synchronous opening and closing of the conventional bleeding nipple simply superfluous. Bleeding brakes was never so easy to handle.

    With the patented stahlbus® Bleeder Valve the complete bleeding process is finished within a few minutes and without any assistance.

    Filling a brake system with the stahlbus® Bleeder Valve

    Bleeeding brakesFor this purpose it is switched to the operating mode "Filling". The system is filled with the help of a little vacuum pump available at our Internet shop and compatible with our system (and which, by the way, is much more simple and cheaper than the pumps which are usually on offer). Subsequently, the stahlbus® Bleeder Valve is switched to the operating mode "Bleeding", and you can bleed your brakes our clutch as usually.

    The hydraulic brakes or clutch are easily fitted with the bleeder valve by simply substituting the old bleeding nipple by the stahlbus® Bleeder Valve. After substitution you can immedeately bleed brakes /clutches or any other hydraulic system.

    The advantages of this innovative stahlbus system are obvious:

    Clean: Due to absolute tightness during the entire bleeding and filling process

    Quick and easy: Due to the integrated non-return valve made for single-handed operation

    Safe: Due to the absolute tightness no air may ingress during the bleeding procedure

    Universal: for all hydraulic systems such as brakes or clutches f.e. in cars, bikes or airplanes usable

     

    3D animation of the stahlbus® Bleeder Valve

     

    Here you can see the Online-Brochures:

    Online-Prospekt-quer-en

    Here you can download and print the PDF-brochure.

    We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.